- Start the application before mooring, the application records and draws your trace on the map.
- Leave your phone on the chart table.
- Moore without worrying about the application.
- Return to the application. On the track, locate the point corresponding to the boat’s position at the time of anchoring. You should be able to detect it relatively easily on the map thanks to the reverse movement after anchoring.
- Center the map on the anchor point using the target sign in the middle of the screen.
- Press the blue “Anchor” button to fix the anchor position.
- Adjust the radius of the wetting area by moving the green dot to the edge of the zone.
- Fix the wetting area by pressing the “Anchor” button again, it turns green. The alarm is activated.
To make sure that the app will always remain active:
- Put the device on charge
- Do not turn off the screen, its brightness will automatically be dimmed to the minimum. If the screen still turns off, go to the Android Settings/ Display / Sleep menu and check “Never” if the option exists.
- Check that you have good GPS reception.