Create or load a route.
If a route is already loaded, long press the screen and choose Manage routes / Edit route modePress the “Edit” button
Press the waypoint to edit
Change the waypoint coordinates or type
Press the “Ok” button then “Open” to return to the map
Waypoints can be of 3 types :
- “Go through.” This is the default type. The boat passes the waypoint and then continues to the next waypoint
- “Leave to starboard.” The boat must leave the waypoint to starboard but is not required to pass through the waypoint.
- “Leave to port.” The boat must leave the waypoint to port but is not required to pass through the waypoint.
The waypoints “Leave to port” and “Leave to starboard” should be handled with care. In practice, they are only used if the angle of the route before and after this waypoint is very open. If the application finds that the angle is too closed, it will consider that the boat will have to pass through the waypoint.
Note: you can delete a waypoint or route by pressing one of the Delete buttons.
Watch a video on YouTube